MSC NANORISC-IMX6
nanoRISC® is a module concept combining the latest low power RISC controllers and embedded interfaces on a small form factor COM (Computer On Module). Ideally suited for embedded applications, a variety of easy-to-use interfaces are available.
The nanoRISC® form factor has been created for applications requiring a small form factor and lowest power consumption. nanoRISC® modules will be plugged onto an application-specific baseboard.
The design of the nanoRISC® IMX6 module is based on the NXP® Cortex™ A9 CPU offering high performance, lowest power consumption and a high degree of functional integration for high level embedded applications. The i.MX6x processor is combined with DDR3 SDRAM, SLC NAND Flash, 10/100/1000 Mbit Ethernet LAN and a power management controller (PMIC).
The module is available in commercial and industrial temperature range. Support for Linux is available. Android and Windows Embedded Compact 7 are available on request.
Highlights
- NXP® i.MX6 Cortex™ A9, 1/2/4 core(s) CPU clocked up to 1.2GHz
- up to 4GByte DDR3 SDRAM soldered
- up to 4GByte SLC NAND soldered or
- up to 64Gbyte eMMC Flash soldered
- 10/100/1000 Base-T Ethernet Interface
- USB 2.0 Host
- USB 2.0 OTG Host/Client High Speed
- Graphics Interfaces:
- HDMI/DVI, LVDS or RGB up to 1920 x 1080
- Dual independent display support
- Video decoder and scaler
- CAN 2.0B, 3x UART, 2x SPI, 2x I²C
- I²S Audio Interface
- SD V3.0 / SDIO V2.0 / MMC V4.3
- Parallel Bus Interface
- Camera Interface ITU656 / CSI
- Commercial and extended commercial temperature range
- Support for Linux and Windows EC7
- Video decoder and scaler
- CAN 2.0B, 3x UART, 2x SPI, 2x I²C
- I²S Audio Interface
- SD V3.0 / SDIO V2.0 / MMC V4.3
- Parallel Bus Interface
- Camera Interface ITU656 / CSI
- Commercial and extended commercial temperature range
- Support for Linux and Windows EC7
Specifications
| Technology: | ARM |
| Form Factor: | nanoRISC |
| CPU: | NXP® i.MX6 ARM Cortex™ A9 i.MX6x |
| RAM: | Up to 4GB DDR3 SDRAM, soldered |
| Flash: | Up to 4GB NAND Flash soldered or up to 64 GB eMMC Flash (optional) |
| Storage Interfaces: | 1x MMC / SD 1x microSD card socket on module |
| USB: | 1x USB 2.0 HS (Host) 1x USB 2.0 OTG HS (Host or Client) |
| Serial Interfaces: | 3x UART 2x I2C 2x SPI |
| Bus Interfaces: | Local Bus Interface Controller Area Network Interface CAN 2.0B |
| Display Controller: | Vivante Graphics Accelerator in CPU |
| Display Interfaces: | RGB 16/18/24 bit up to 1920x1080 LVDS dual channel (1920x1080) or 2x single channel (1366x768) (RGB-TTL for single-core and dual-lite modules) HDMI/DVI up to 1920x1080 |
| Network Interface: | 10/100/1000 Base-TX |
| Audio Interface: | I2S Audio |
| Miscellaneous: | Watchdog Timer, Battery Charger - Supports 1x Lithium cell, LED Backlight Interface - Current Source for LED backlight |
| Feature Highlights: | MicroSD card slot on module |
| Firmware: | Bootloader for Linux installed |
| OS Support: | BSP for Linux, Android (Windows EC7, WEC2013 on request) |
| Power Requirement: | +5V DC +/-5% (Power Brick or USB); +3V6…+4V2 (single lithium cell) |
| Environment: | Ambient Temperature 0°… 70°C (all components commercial temp. or better) -25°… 85°C (all components at least extended commercial temp) -40°… 85°C (all components industrial temp) -40°… 85°C (storage), Humidity 5 … 95% (operating, no |
| Dimensions: | 70mm x 50mm |
| Certificates: | UL / CE |
| Cooling: | Heatspreader recommended |
| Carrier: | 100 x 160mm Evaluation Board nanoRISC-MB2 |