MSC Q7-BW
The MSC Q7-BW module is based on Intel‘s multi-core system-on-chip (SOC) Atom generation (“Braswell”) that integrates next generation Intel processor core, graphics, memory, and I/O interfaces into one solution. Based on 14nm processor technology this multi-core processor provides outstanding computing and graphics performance and is more power efficient compared to its predecessors.
The new MSC Q7-BW brings triple independent display support, DirectX 11.1, fast DDR3L-1600 memory and USB 3.0 on a compact, power saving and cost-efficient Qseven Rev. 2.0 compliant module.
Different SOCs with dual- and quad-core processors are supported by this design. Next to an extensive set of interfaces and features, the MSC Q7-BW optionally offers hardware based security compliant to the requirements of TCG (Trusted Computing Group).
For evaluation and design-in of the MSC Q7-BW module, MSC provides suitable Qseven Rev. 2.0 platform boards. A complete, ready-to-run Starterkit is also available.
Highlights
- Intel Pentium N3710 quad-core 1.6/2.56GHz, 6W
- Intel Celeron N3160 quad-core 1.6/2.24GHz, 6W
- Intel Celeron N3060 dual-core 1.6/2.48GHz, 6W
- Intel Celeron N3010 dual-core 1.04/2.24GHz, 4W
- Intel Atom x5-E8000 quad-core 1.04/2.0GHz, 5W
- Integrated Intel Gen. 8 HD Graphics
- Up to 8GB DDR3L SDRAM, dual-channel
- Up to 64GB eMMC Flash (optional)
- Up to 64GB SATA NAND Drive (optional)
- Up to 2x SATA-III interfaces (6Gbps)
- DisplayPort/HDMI/DVI interface
- LVDS/Embedded DisplayPort interface
- Triple Independent Display support
- DirectX 11.1, OpenGL 4.2, OpenCL 1.2
- Up to 3x PCI Express x1 Gen. 2
- Up to 2x USB 3.0 Host interfaces
- Up to 8x USB 2.0 Host interfaces
- 1x USB Host/Device support*
- Gigabit Ethernet
- UART, LPC, I2C, SMBus
- HD Audio, SD Card interface
- Trusted Platform Module (optional)
- Qseven Rev. 2.0 compliant
- UEFI Firmware
Specifications
| Technology: | x86 |
| Form Factor: | Qseven |
| CPU: | Intel Pentium N3710 quad-core 1.6/2.56GHz, 2MB cache, 16 EU GFX, 6W Intel Celeron N3160 quad-core 1.6/2.24GHz, 2MB cache, 12 EU GFX, 6W Intel Celeron N3060 dual-core 1.6/2.48GHz, 2MB cache, 12 EU GFX, 6W Intel Celeron N3010 dual-core 1.04/2.24GHz, 2M |
| Chipset: | Integrated in SOC |
| RAM: | Up to 8GB 1600 MT/s DDR3L SDRAM, dual-channel, soldered |
| Flash: | Up to 64GB eMMC Flash, soldered (optional) Up to 64GB SATA NAND Drive, soldered (optional) |
| Storage Interfaces: | 2x SATA-III 6Gbps (one port used for optional SATA NAND Drive) 1x SD 3.01 |
| USB: | 4x USB 2.0 + 2x USB 3.0, one port supports USB 2.0/3.0 Host/Device* orrnrn5x USB 2.0 + 1x USB 3.0, one port supports USB 2.0 Host/Device* orrnrn6x USB 2.0 + 1x USB 3.0, one port supports USB 2.0 Host/Device* orrnrn8x USB 2.0, one port supports USB 2. |
| Serial Interfaces: | 1x UART (no handshake) |
| Bus Interfaces: | Up to 3x PCI-Express x1 Gen. 2 lanes 1x LPC Bus 1x I2C Bus 1x SPI Bus* 1x SMBus *User/SIO SPI not supported; only external BIOS Flash |
| Display Controller: | Integrated Intel HD graphics Gen. 8 Up to 16 execution units (EU) 3D Acceleration: DirectX 11.1, OpenGL 4.2, OpenCL 1.2 Video Decode: MPEG2, H.264 (L5.1), VC-1, WMV9, VP8, JPEG/MJPEG |
| Display Interfaces: | Three independent displays supported 1x DisplayPort++ (DisplayPort 1.1a / HDMI 1.4b up to 3840 x 2160 @ 30Hz or 2560 x 1600 @ 60Hz) Dual-Channel LVDS 24/18 bit up to 1920 x 1200 @ 60Hz or 2x Embedded DisplayPort 1.4 up to 2560 x 1440 @ 60Hz (optional |
| Network Interface: | 10/100/1000Base-T (Intel i210) |
| Audio Interface: | High Definition Audio |
| Security Device: | Infineon Trusted Platform Module 1.2 (optional) |
| Miscellaneous: | Watchdog Timer: Initiates system reset, (programmable, 1s … 255h) Fan Supply: PWM Speed Control for system fan on carrier board Real-Time Clock: Integrated in SOC, external battery System Monitoring: Voltage, Temperature, CPU Fan, System Fan |
| Feature Highlights: | Qseven Rev.2.0 compliant |
| Firmware: | AMI Aptio UEFI |
| OS Support: | Windows 7 / 8 / 10 BSP for Linux on request EAPI (HW Programming Interface) |
| Power Requirement: | +5V +/-5% +5V Standby |
| Environment: | Temperature Range: 0° … 60°C (operating commercial) -25° … 85°C (storage) Humidity: 5 … 95% (operating, non-condensing) 5 … 95% (storage, non-condensing) |
| Dimensions: | 70 x 70 mm |
| Certificates: | UL / CE |
| Cooling: | Heatspreader Heatsink |
| Carrier: | MSC Q7-MB-EP5 MSC Q7-MB-EP6 |