MSC Q7-IMX6PLUS
The design of the MSC Q7-IMX6PLUS module was optimized to provide an especially economic platform for NXP’s i.MX6 and i.MX6Plus CPUs offering quad-core, dual-core and single-core ARM® Cortex™-A9 compute performance at very low power consumption and excellent graphics performance combined with a high degree of functional integration.
The MSC Q7-IMX6PLUS CPU Module provides a choice of computing performance ranging from economic single-core to high-performance quad-core power in combination with a high graphics performance and low power consumption available over a wide temperature range.
It incorporates the i.MX 6 (Solo, DualLite, Dual or Quad) or the i.MX 6DualPlus or 6QuadPlus processor with up to 1.2 GHz, up to 4GB DDR3 DRAM and up to 64GB eMMC Flash memory as well as an extensive set of interface controllers. The module provides the new Qseven Rev. 2.0 interface, allowing easy integration with Qseven baseboards.
For evaluation and design-in of the Q7-IMX6PLUS modules, MSC provides a development platform, target platform and a starter kit. The MSC Q7-IMX6PLUS module is supported by Linux.
Highlights
- NXP™ i.MX 6 ARM® Cortex™-A9 Solo, DualLite, Dual, Quad, DualPlus and QuadPlus processor
- MPEG-4 Video Encoding/Decoding 1080p
- HDMI graphics 1920 x 1080 x 30fps
- Dual-channel LVDS 1920 x 1080 x 30fps
- Up to 4GB DDR3L SDRAM
- Up to 64GB eMMC Flash
- Gigabit Ethernet Interface
- 1x PCI Express x1
- 1x SATA-II (3Gbps, quad-/dual-core only)
- 1x USB Device/Host + up to 4x USB 2.0
- 1x MMC/SD/SDIO Interface
- CAN Interface
- I2S Audio Interface
- MIPI CSI-2 Camera Interface (optional)
- Micro SD Card Socket
Specifications
| Technology: | ARM |
| Form Factor: | Qseven 2.0 |
| CPU: | NXP™ i.MX 6 ARM® Cortex™-A9: - i.MX 6QuadPlus, quad-core, 800MHz…1.2GHz - i.MX 6Quad, quad-core, 800MHz…1.2GHz - i.MX 6DualPlus, dual-core, 800MHz…1.2GHz - i.MX 6Dual, dual-core, 800MHz…1.2GHz - i.MX 6DualLite, dual-core, 800MHz…1.0GHz |
| Chipset: | SOC |
| RAM: | Up to 4GB DDR3L SDRAM (DDR-1066), soldered |
| Flash: | Up to 64GB eMMC Flash (optional) or Up to 1GB SLC NAND Flash (optional) |
| Storage Interfaces: | Micro SD Card Socket (optional) 1x MMC/SD/SDIO 1x SATA-II (3Gbps, not supported by Solo/DualLite CPU) |
| USB: | 1x USB 2.0 Host/Client, 1x USB 2.0 Host or 1x USB 2.0 Host/Client, 4x USB 2.0 Host (optional) |
| Serial Interfaces: | UART |
| Bus Interfaces: | 1x PCI Express x1 1x CAN 2.0B 1x I2C up to 400 Kbit/s 1x SPI (with two chip selects) 1x SMBus |
| Display Controller: | Video, 2D and 3D Graphics Units integrated in i.MX6 Processor OpenGL® ES 1.1/2.0/Halti, OpenVG™ 1.1, OpenCL™ 1.1 EP Multi-Format Hardware Video Encoder/Decoder |
| Display Interfaces: | Dual-channel LVDS interface, 18 or 24 bit (up to 1920x1080). Also usable as 2x single-channel LVDS interface (up to 1366x768) HDMI V1.4 up to WUXGA (1920x1080) incl. Full-HD @ 30fps MIPI CSI-2 Camera Interface (optional, Feature Connector) |
| Network Interface: | 1x 10/100/1000BASE-T Ethernet |
| Audio Interface: | I2S Audio |
| Miscellaneous: | Watchdog Timer for system reset (programmable, 1s … 600s) 8x GPIO, configurable as input or output 2kbit ID EEPROM on SMBus |
| Feature Highlights: | FEATURE HIGHLIGHTS DATA HERE! |
| OS Support: | Linux Board Support Package |
| Power Requirement: | Power Supply +5V +/-5%, 5V Standby Power Consumption 4-6 W typ. (depending on CPU and optional features) |
| Environment: | Temperature Range: 0°C … +70°C operating commercial -40°C … +85°C operating extended -40°C … +85°C storage Humidity: 5 … 95% (operating, non condensing) 5 … 95% (storage, non-condensing) |
| Dimensions: | 70 x 70 x 13 mm with heat spreader installed |
| Certificates: | UL / CE |