MSC C10M-ASL
The MSC C10M-ASL features the Intel® Atom® Processor x7000RE/C Series. With support for up to eight processor cores, the module fits to a wide range of applications including automation, point-of-sales terminals, digital signage controllers, HMI solutions and medical equipment.The board is ideal for system products that are exposed to harsh ambient conditions. It is designed for extended temperature range and 24/7 continuous operation.
The new MSC C10M-ASL offers dual independent display support with a maximum of 4k resolution, fast LPDDR5 memory with up to 16GB and IBECC capabilities, eMMC 5.1, USB 3.2 Gen 2 (10Gb/s) and PCIe Gen3 on a power saving and cost-efficient COM Express mini module.
Different SOCs with dual-, quad- and eight-core processors are supported by this design. The RE-CPUs have a powerfull GPU whereas the C-CPUs are designed for headless applications. In addition to an extensive set of interfaces and features, the MSC C10M-ASL offers Gigabit Ethernet based on Intel® i226 and supports up to 2.5GbE bandwidth.
System investments are well protected through long-term availability of the module, designed, and manufactured by Avnet Embedded. The COM Express standard enables performance scaling and migrating applications to future technology upgrades when they become available.
Highlights
- Up to eight processing cores
- Power efficient processors, TDP 6 to 14W
- Integrated Intel UHD Gen.12 graphics, max. 32 executing units
- SKUs without GPU (headless) available
- Up to 16GB LPDDR5 SDRAM with IBECC
- Up to 256GB eMMC 5.1 Flash (optional)
- 2x SATA-III interface (6Gbps)
- DisplayPort/HDMI/DVI interface
- LVDS/Embedded DisplayPort interface
- Dual Independent Display support
- MIPI-CSI Camera Interface
- 4x PCI Express x1 Gen. 3
- Two USB 3.2 Gen 2 (10Gb/s) and eight USB 2.0 interfaces
- One Gb Ethernet port (Intel® i226)
- TSN, TCC support
- UART, SPI, I2C, SMBus
- High Definition Audio (HD-A)
- UEFI Firmware
- Trusted Platform Module TPM 2.0
Specifications
| Technology: | x86 |
| Form Factor: | COM Express Mini |
| CPU: | Intel Atom® x7835RE, octa-core, 1.3GHz, 32EU, TCC, 12W, IUC, ET Intel Atom® x7433RE, quad-core, 1.5GHz, 32EU, TCC, 9W, IUC, ET Intel Atom® x7213RE, dual-core, 2.0GHz, 16EU, TCC, 9W, IUC, ET Intel Atom® x7211RE, dual-core, 1.0GHz, 16EU, TCC, 6W, I |
| Chipset: | SOC |
| RAM: | Up to 16GB LPDDR5 SDRAM, up to 4800MT/s, IBECC |
| Flash: | On-board eMMC mass storage option, scalable capacity up to 256GB |
| Storage Interfaces: | 2x SATA 6Gb/s |
| Bus Interfaces: | 4x PCI Express x1 Gen 3 (1x PCI Express x4 Gen 3 on request), LPC bus (Low Pin Count bus; no DMA support) (eSPI on request) |
| Display Controller: | Integrated Intel UHD Graphics (Gen12) Up to 32 execution units (EU) SKUs without GPU (headless) available |
| Display Interfaces: | Two independent displays supported: 1x Digital Display Interface (DP, HDMI) 1x Embedded DisplayPort (on variants without LVDS only); LVDS 24bit, single-channel (not on all variants); max. 1920 x 1200 @ 60Hz |
| Network Interface: | 10/100/1000Base-TX, 2.5G² based on Intel i226 ² Available bandwidths depending on carrier design |
| Audio Interface: | High Definition Audio (HD-A) |
| Security Device: | TPM 2.0 |
| Miscellaneous: | Watchdog Timer: Initiates system reset RTC battery: external System Monitoring: voltage, temperature, system fan GPIO, GSPI (COM.0 Rev. 3.1) |
| Feature Highlights: | Type 10 pin-out |
| Firmware: | AMI Aptio UEFI |
| OS Support: | Windows 10 IoT Enterprise 2021 LTSC Yocto Project (LTS kernel 2021) |
| Power Requirement: | Wide range input +5 … +20V, 5V Stby optional, 8W (typ.) up to 14W (typ.) |
| Environment: | Temperature Range: -40° … 85°C (operating), -25° … 85°C (storage) Humidity: 5 … 95% (operating, non-condensing), 5 … 95% (storage, non-condensing) |
| Dimensions: | 84mm x 55mm |
| Certificates: | UL / CE |
| Cooling: | Passive heat sink Heat spreader with threaded or non-threaded standoffs |
| Carrier: | Small carrier board (Mini-ITX) as part of a starter kit; |