PicoZed
The PicoZed module contains the core requirements to support SoC design including memory, configuration, Ethernet, USB, and clocks. It provides easy access to over 100 user I/O pins through three I/O connectors on the backside of the module. These connectors can support dedicated interfaces for Ethernet, USB, JTAG, power and other control signals, as well as the GTP/GTX transceivers on the 7015/7030 models. The transceiver based 7015 and 7030 versions of PicoZed are a superset of the 7010/7020 version, adding four high-speed serial transceiver ports to the I/O connectors. You can design your own carrier card, plug-in a PicoZed, and start application development with a proven Zynq-7000 AP SoC sub-system.
Highlights
Target Applications:
- Embedded system-on-module (SOM)
- Audio Video
- Test & Measurement
- Defense & Aerospace
- Industrial
Key Features:
- XC7Z010-1CLG400
- XC7Z015-1CLG485C
- XC7Z020-1CLG400
- XC7Z030-1SBG485C
- DDR3 1GB, x32 configuration)
- 128 Mb QSPI
- eMMC Rev E = 8GB
- 10/100/1000 Ethernet PHY
- USB 2.0 OTG PHY (Requires End User Carrier Card)
- AMD Xilinx Zynq 7000 SoC DeviceXC7Z010-1CLG400XC7Z015-1CLG485CXC7Z020-1CLG400XC7Z030-1SBG485C
Kit Includes:
- PicoZed SOM
Specifications
| Dimensions: | 57.15 mm x 101.6 mm |
| CPU: | Dual-core ARM Cortex-A9 MPCore™ with CoreSight™ |
| Chipset Brand: | AMD |
| RAM: | 1 GB DDR3 (x32) |
| Flash: | 128 Mb QSPI; eMMC (8GB x8 Rev E only) |
| Memory: | 256KB On-Chip |
| Storage Interfaces: | SATA (7015/7030 only) |
| USB: | USB 2.0 OTG PHY (Connector on End User Carrier Card) |
| Bus Interfaces: | 26 PS MIO User pins;<br /> <ul> <li>USB;</li> <li>SPI;</li> <li>SDIO;</li> <li>ULPI;</li> <li>I2C</li> </ul> |
| PCI Express: | PCIe Gen 2 |
| Network Interface: | 10/100/1000 Ethernet PHY |
| OS Support: | PetaLinux |
| Environment: | -40° - 85°C (storage); C-Grade: Ambient Temperature; 0° - 70°C (operating); I-Grade: Ambient Temperature; -40° - 85°C (operating) |
| Max Temperature (°C): | *C-Grade: 70*I-Grade: 85 |
| Cooling: | Heatsink and Fan not included. End user should design for specific requirements and mounting alternatives. |
| Carrier: | AES-PZCC-FMC-V2-G |
| Miscellaneous: | 3 Micro Headers for connection to end-user carrier cards, three 100-pin connector; 5 Boot Mode options; Battery Backup for Device Secure Boot Encryption key |
Documentation and Support Files
Documentation, support files, and additional information about this product.
Order Info
Related Products
