MicroZed
MicroZed™ is a low-cost SOM that is based on the AMD Xilinx Zynq®-7000 SoC. In addition to the Zynq-7000 SoC, the module contains the common functions and interfaces required to support the core of most SoC designs, including memory, configuration, Ethernet, USB, and clocks. On the bottom side of the module, MicroZed contains two 100-pin I/O headers that provide connection to two I/O banks on the programmable logic (PL) side of the Zynq-7000 SoC device. When plugged onto a user designed baseboard or carrier card, these 100-pin connectors provide connectivity between the Zynq-7000 SoC PL I/Os and the user circuits on the carrier card. MicroZed also includes on-board power regulation that supports 5 V input with an option to support 12 V input.
Industrial Temperature MicroZed SOMs are built with components supporting extended temperatures of -40 to +85°C, with the exception of the use of the microSD card connector. Due to the configurability of the Zynq device, the user must perform final temperature testing validation.
Highlights
Target Applications:
- Embedded system-on-module (SOM);
- Embedded Vision
- Test & Measurement
- Motor Control
- Industrial Automation
Kit Includes:
- MicroZed kit
- MicroSD card
Specifications
| Dimensions: | 57.15mm x 101.6mm |
| CPU: | Dual-core ARM Cortex-A9 MPCore™ with CoreSight™ |
| Chipset: | Zynq®-7000 SoC |
| Chipset Brand: | AMD |
| RAM: | 1GB of DDR3 SDRAM |
| Flash: | 128 Mb QSPI |
| Memory: | 256KB On-Chip |
| USB: | USB 2.0 |
| Bus Interfaces: | CAN 2.0 A; CAN 2.0 B |
| Network Interface: | 10/100/1000 Ethernet; IEEE 802.3; IEEE 1588 rev 2.0 |
| OS Support: | PetaLinex |
| Power Requirement: | USB 5V; End-user carrier 5V DC and 12V DC; End-user populated barrel jack 5V DC |
| Environment: | -40° - 85°C (storage); C-Grade: Ambient Temperature, 0° - 70°C (operating); I-Grade: Ambient Temperature, -40° - 85°C (operating); |
| Max Temperature (°C): | *C-Grade: 70*I-Grade: 85 |
| Certificates: | CE |
| Cooling: | Heatsink and Fan; End user should design for specific requirements and mounting alternatives. |
| Carrier: | <pre>Arduino Carrier Card</pre> |
| Miscellaneous: | 2 Micro Headers for connection to end-user carrier cards, two 100-pin connector; 1 Digilent Pmod compatible interface; Evaluation and production versions; Boot Mode options acceible by changing jumpers or cost-optimized version repaces jumpers wit |
Documentation and Support Files
Documentation, support files, and additional information about this product.
Order Info
