MSC HC-MB-EV
The MSC HC-MB-EV is intended for design teams that
require an easy and fast enablement of COM-HPC based
solutions for lab evaluation, rapid prototyping and
application development. Engineers can use it as a
reference design for developing their own COM-HPC
platform. The COM-HPC Client carrier provides a rich set of
COM-HPC Client interfaces routed to the module socket
including PCIe® and PEG ports, DDI and eDP graphics
interfaces, and high speed I/O like USB and SATA.
COM-HPC Client modules of either Size A, B and C can be
installed on the carrier.
Highlights
- Socket for COM-HPC® Client modules, Size A, B, C
- PCI Express® x16 slot (PEG/general PCIe)
- PCI Express® x16 slot (general PCIe)
- Three PCI Express slots 1×4
- Support for PCIe Gen 3 and 4
- Two SATA connectors
- M.2 socket for mass storage and AI modules
- Two USB4® Gen 2×2, Type-C connectors
- Two USB 3.2 Gen 2×1 Type-A connectors
- Two 1G/2.5G/10GBASE-T connectors (RJ45)
- Three DisplayPort connectors
- One eDP connector
- Audio module socket
- Various additional COM-HPC® specific interfaces
- Power supply via ATX-style power connectors
- Wide power input range
- Size 305mm x 244mm (ATX)
Specifications
| Form Factor | ATX |
| Flash | M.2 socket for mass storage and AI modules: PCIe x4 Card lengths 42/80/110 mm, M-key, max. 15W |
| Storage Interfaces | 2x SATA up to 6Gb/s on on-board connectors |
| USB | 2x USB4 Gen 2x2, Type-C connector on faceplate, 15W power delivery each 2x USB 3.2 Gen 2x1, Type-A connector on faceplate 4x USB 2.0 available on pin headers Supported USB modes depending on installed COM-HPC module capabilities |
| Serial Interfaces | NO Serial Interfaces |
| Bus Interfaces | PCI Express Gen 3 and 4 One PEG port x16 on PCI Express x16 socket max. 75W One PCI Express slots 1x16 Three PCI Express slots 1x4 one slot max. 25W, two slots max. 10W Maximum connectivity and bandwidth is determined by installed COM-HPC module and PCIe cards |
| Display Interfaces | DisplayPort: Three DisplayPort connectors on faceplate Embedded DisplayPort: One 40-pin eDP on-board connector MIPI CSI: Two MIPI CSI connectors on-board MIPI DSI: Module signals shared with eDP |
| Network Interface | Two RJ45 LAN connectors on faceplate Routed to COM-HPC module socket Support up 10/100/1000, 2.5GBASE-T or 10GBASE-T depending on installed COM-HPC module capabilities Two status LED‘s integrated per connector |
| Audio Interface | Socket for audio module (separate order item) Audio interfaces available at triple audio jack on faceplate: Line In, Line Out/Headphones, Microphone |
| Miscellaneous | Various pin-headers providing: GPIO, SMBus, I²C bus, SPI, power button, reset button, power conditions and other system signals PORT 80 display Serial high speed port: Two ports routed from module socket to on-board pin headers BIOS Flash Pin-header for external BIOS Flash, selectable either on-board or on the module Fan: 4 pin fan connector PWM controlled by COM Express module EEPROM One serial EEPROMs on I²C bus Battery: CR 2032 type RTC battery (3V, socketed) |
| Feature Highlights | Carrier board for COM-HPC® Client pin-out Note: availability and capabilities of interfaces determined by installed COM-HPC Client module and I/O cards. |
| Power Requirement | ATX supply via Standard 24pin ATX and ATX12V connectors Single voltage supply via ATX12V connector (optionally wide input range 8V to 20V) |
| Environment | Ambient Temperature: 0° … 60°C (operating), -25° … 85°C (storage) Humidity: 5 … 95% (operating, non-condensing), 5 … 95% (storage, non-condensing) |
| Dimensions | 305mm x 244mm |
| Certificates | NO Certificates |
