MSC OSM-SF-IMX91
The MSC OSM-SF-IMX91 is based on the new OSM 1.1 standard (Size-S) “Small” for completely machine processible low-cost embedded computer modules during soldering, assembly and testing.
Highly scalable and equipped with i.MX 91 Applications Processors manufactured by NXP. The processor integrates an Arm Cortex-A55 core, bringing performance and energy efficiency to Linux-based edge applications and delivers advanced security with integrated EdgeLock secure enclave for cost-effective headless solutions at the edge.
MSC OSM-SF-IMX91 provides fast and low power LPDDR4 memory technology with inline ECC support, combined with up to 256GB eMMC Flash memory. Various interfaces for embedded applications such as Dual Gigabit Ethernet (RGMII), USB 2.0, 2x CAN-FD are available. The typical design power ranges from 2 W to 3 W.
The module is compliant with the new OSM 1.1 standard (OSM-SF). For evaluation and design-in of the new OSM-SF-IMX91 module, MSC provides a development platform and a starter kit. A Yocto based Linux Board Support Package is available (Android support on request).
Highlights
- Single core ARM Cortex-A55 Application Processor up to 1.4GHz
- Media Processing Engine (MPE) with Arm Neon™ technology
- Up to 2GB LPDDR4 SDRAM with inline ECC
- Up to 256GB eMMC Flash
- 1x USB 2.0 Host interface
- 1x USB 2.0 Host/Device interface
- 2x Gigabit Ethernet (RGMII)
- 2x SD/SDIO interface
- 2x CAN-FD interfaces
- 1x I2S Audio interface
- 4x UART, 2x SPI, 4x I2C
- 20x GPIO
- 2x ADC inputs (12-bit)
- Optimized design for low power applications
- OSM 1.1 (SF) Compliant, 322 Pin, RM 1,25 mm
Specifications
| Technology | ARM |
| Form Factor | OSM-SF, 322 Pin, RM 1,25 mm |
| CPU | NXP i.MX 91 Arm Cortex-A55 Application Processor, single-core, up to 1.4GHz, consumer and industrial grade |
| Chipset | SOC |
| RAM | Up to 2GB 2400MT/s LPDDR4 SDRAM, soldered, inline ECC support |
| Flash | Up to 256GB eMMC Flash |
| Storage Interfaces | 2x MMC/SD/SDIO |
| USB | 1x USB 2.0 Host/Client, 1x USB 2.0 Host |
| Serial Interfaces | 1x UART Console with Rx, Tx only 1x UART with 2-wire hand shake 2x UART w/o hand shake |
| Bus Interfaces | 2x I2C up to 400 Kbit/s 2x SPI (with two chip selects) 2x CAN-FD /CAN 2.0B |
| Display Controller | not available |
| Display Interfaces | not available |
| Network Interface | 2x Ethernet, (RGMII interface) |
| Audio Interface | 1x I2S Audio |
| Security Device | Advanced Security, Safety, and Reliability integrated in the SOC Integrated EdgeLock secure enclave enables autonomous management of security functions, including runtime attestation, silicon root of trust, reusable certifications, trust provisioning, and fine-grain key management augmented by extensive crypto services for advanced attack resistance |
| Miscellaneous | Watchdog Timer for system reset (programmable, 1s … 600s) RTC 20x GPIO, configurable as input or output, interrupt capable 2x PWM 2x ADC inputs (12-bit) Camera interface not available |
| Feature Highlights | OSM, Size-S compatible |
| Firmware | uboot |
| OS Support | Linux Board Support Package Android Board Support Package (on request) |
| Power Requirement | Power Supply +5V +/-5% Power Consumption 500mW - 2W typ. (depending on CPU) |
| Environment | Temperature Range: Commercial: 0° … 70°C (operating) -20° … 85°C (storage) Extended: -25° … 85°C (operating) -40° … 85°C (storage) Industrial: -40° … 85°C (operating) -40° … 85°C (storage) Humidity: 5 … 95% (operating, non condensing) 5 … 95% (storage, non-condensing) |
| Dimensions | 30 x 30 mm |
| Certificates | UL / CE |
| Carrier | MSC SM2F-OSM-AD-001 |
Order Info
| Order No. | Description | Reference | Status |
| tbd | OSM 1.1 module based on NXP i.MX 91, Single Core Cortex-A55 processorat 1.4GHz, 1GB LPDDR4, 16GB eMMC Flash, 2x GbE (RGMII), 1x USB2.0Host, 1x USB2.0 Host/Device, 2x CAN-FD, commercial temperature 0...+70°C (Engineering Sample - get in touch withyour sales representative) | MSCOSM-SF-IMX91-SC-04N0A00CES1 PCBES | OR |
