MSC Q7-SK-BT-EP6
The Qseven Rev. 2.0 Starter Kit for Qseven modules with the Intel Atom E3800 SOCs is based on a 3.5″ Qseven carrier board MSC Q7-MB-EP6 and contains all necessary products to quickly enable the user to run and evaluate the E3800 module range. The kit does not contain a Qseven module in order to give the user greater flexibility as to which particular module version and CPU speed variant is desired.
As part of the Qseven Starter Kit, the appropriate heatsink and a power supply with cable kit will be supplied. Direct screen output on a PC monitor is possible using the on-board DP output while LVDS signals are available for TFT output. Optional TFT Kits are available on request.
Highlights
- 3.5″ Qseven carrier board with socket for Qseven Rev. 2.0 module
- Heatsink for all module variants of the Q7-BT family
- 12V power supply and cable kit included for immediate operation of the Starter Kit
- Getting Started manual, drivers, manuals etc. are available on the MSC Support website
- DP graphics output
- LVDS graphics output on standard 30-pin connector; backlight connector includes adjustable backlight voltage and dimming
- 2x Ethernet (10/100/1000 LAN) connector, 1x SATA connector
- USB 3.0, 3x USB 2.0, 1x microUSB OTG, 2x UART, SD-Card socket, miniPCIexpresss and mSATA slots
- Optional 7″ WVGA (800 x 480) and 12.1″ XGA (1024×768) TFT kits
Specifications
| Technology | x86 |
| Form Factor | Qseven |
| RAM | NO RAM |
| Flash | NO Flash |
| Storage Interfaces | 2x SATA 3Gb/s |
| USB | 1x USB 3.0 3x USB 2.0 1x USB 2.0 OTG |
| Serial Interfaces | 2x RS232 1x RS485 |
| Bus Interfaces | I²C Bus SMBus SPI |
| Display Interfaces | DisplayPort (derived from DDI channel) LVDS 18/24 bit, dual channel |
| Network Interface | 2x 10/100/1000Base-TX (one from Qseven module, one from on-board LAN Controller) |
| Audio Interface | High Definition Audio |
| Miscellaneous | RTC battery holder |
| Power Requirement | +10V..+28V input voltage |
| Environment | Ambient Temperature: 0° … 60°C (operating), -40° … 85°C (storage) Humidity: 5 … 95% (operating, non-condensing), 5 … 95% (storage, non-condensing) |
| Dimensions | 148mmx102mm |
| Certificates | UL / CE |
| Cooling | Suitable Heatspreader with Heatsink for Q7-BT Module |
| Carrier | Carrier board in 3.5" (ECX) form factor |
Order Info
| Order No. | Description | Reference | Status |
| 46995 | The Qseven Rev. 2.0 Starter Kit for Qseven modules with the Intel Atom E3800 SOCs is based on a 3.5" Qseven carrier board MSC Q7-MB-EP6 and contains all necessary products to quickly enable the user to run and evaluate the E3800 module range. The kit does not contain a Qseven module in order to give the user greater flexibility as to which particular module version and CPU speed variant is desired. As part of the Qseven Starter Kit, the appropriate heatsink and a power supply with cable kit will be supplied. Direct screen output on a PC monitor is possible using the on-board HDMI/DP output while LVDS signals are available for TFT output. | MSC Q7-SK-BT-EP6-KIT001 | OR |
Accessories
5.0″ Display kit
| Order No. | Description | Reference |
| 81871 | Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 5.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) | MSC DIS-AM800480-050-KIT SETPAC |
7″ Display kit
| Order No. | Description | Reference |
| 78911 | Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 7.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) | MSC DIS-AM800480-070-KIT SETPAC |
10.1″ Display kit
| Order No. | Description | Reference |
| 78879 | Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 10.1" WVGA LCD with PCAP Touch Sensor and Touch Controller. Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch). | MSC DIS-AM1280800-101-KIT SETPAC |
12.1″ Display kit
| Order No. | Description | Reference |
| 78880 | Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 12.1" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) | MSC DIS-AM1280800-121-KIT SETPAC |
