MSC C10M-ALN
The new MSC C10M-ALN module features the Intel Atom® processors x7000E Series, Intel® Core ™i3 processor and Intel® Processors N Series (codenamed “Alderlake N”). The CPU architecture is based on the same Efficient-cores and Intel® UHD graphics driven by Xe architecture as the 12th Gen Intel® Core™ processors, thus easing up application migration across Intel® CPU performance and power ranges. With support for up to eight processor cores, the module fits to a wide range of applications including point-of-sales terminals, digital signage controllers, HMI solutions and medical equipment.
The new MSC C10M-ALN offers dual independent display support with a maximum of 4k resolution, fast LPDDR5 memory with up to 16GB and optional IBECC capabilities, eMMC 5.1, USB 3.2 Gen 2 (10Gb/s) and PCIe Gen3 on a power saving and cost-efficient COM Express mini module.
Different SOCs with dual-, quad- and eight-core processors are supported by this design. In addition to an extensive set of interfaces and features, the MSC C10M-ALN offers Gigabit Ethernet based on Intel® i226 and supports up to 2.5GbE bandwidth. System investments are well protected through long-term availability of the module, designed, and manufactured by Avnet Embedded. The COM Express standard enables performance scaling and migrating applications to future technology upgrades when they become available.
Highlights
- Up to eight processing cores
- Power efficient processors, TDP 6 to 15W
- Integrated Intel UHD Gen.12 graphics, max. 32 executing units
- Up to 16GB LPDDR5 SDRAM (IBECC for Atom SKU´s)
- Up to 256GB eMMC 5.1 Flash (optional)
- 2x SATA-III interface (6Gbps)
- DisplayPort/HDMI/DVI interface
- LVDS/Embedded DisplayPort interface
- Dual Independent Display support
- MIPI-CSI Camera Interface
- 4x PCI Express x1 Gen. 3
- Two USB 3.2 Gen 2 (10Gb/s) and eight USB 2.0 interfaces
- One Gb Ethernet port (Intel® i226)
- TSN, TCC support
- UART, SPI, I2C, SMBus
- High Definition Audio (HD-A)
- UEFI Firmware
- Trusted Platform Module TPM 2.0
Specifications
| Technology: | x86 |
| Form Factor: | COM Express Mini |
| CPU: | Intel® Core™ i3-N305, eight-core, 1.0GHz/1.8GHz, 32EU, 9/15W, PUC Intel Atom® x7425E, four-core, 1.5GHz, 24EU, TCC, 12W, EUC Intel Atom® x7213E, two-core, 1.7GHz, 16EU, TCC, 10W, EUC Intel Atom® x7211E, two-core, 1.0GHz, 16EU, TCC, 6W, EUC Inte |
| Chipset: | SOC |
| RAM: | Up to 16GB LPDDR5 SDRAM, up to 4800MT/s, IBECC (only Atom SKU´s), soldered |
| Flash: | On-board eMMC mass storage option, scalable capacity up to 256GB |
| Storage Interfaces: | 2x SATA 6Gb/s |
| Bus Interfaces: | 4x PCI Express x1 Gen 3 (1x PCI Express x4 Gen 3 on request), LPC bus (Low Pin Count bus; no DMA support) (eSPI on request) |
| Display Controller: | Integrated Intel UHD Graphics (Gen12) Up to 32 execution units (EU) |
| Display Interfaces: | Two independent displays supported: 1x Digital Display Interface (DP, HDMI) 1x Embedded DisplayPort (on variants without LVDS only); LVDS 24bit, single-channel (not on all variants); max. 1920 x 1200 @ 60Hz |
| Network Interface: | 10/100/1000Base-TX, 2.5G² based on Intel i226 ² Available bandwidths depending on carrier design |
| Audio Interface: | High Definition Audio (HD-A) |
| Security Device: | TPM 2.0 |
| Miscellaneous: | Watchdog Timer: Initiates system reset RTC battery: external System Monitoring: voltage, temperature, system fan GPIO, GSPI (COM.0 Rev. 3.1) |
| Feature Highlights: | Type 10 pin-out |
| Firmware: | AMI Aptio UEFI |
| OS Support: | Windows 10 IoT Enterprise 2021 LTSC Yocto Project (LTS kernel 2021) |
| Power Requirement: | Wide range input +5 … +20V, 5V Stby optional, 8W (typ.) up to 17W (typ.) |
| Environment: | Temperature Range: Commercial: 0° … 60°C (operating) -20° … 85°C (storage) Humidity: 5 … 95% (operating, non-condensing) 5 … 95% (storage, non-condensing) |
| Dimensions: | 84mm x 55mm |
| Certificates: | UL / CE |
| Cooling: | Passive heat sink Heat spreader with threaded or non-threaded standoffs |
| Carrier: | Small carrier board (Mini-ITX) as part of a starter kit; |