MSC C7-SK-DV-EV
The MSC C7-SK-DV-EV-KIT001 is a ready-to-run Starter Kit for COM Express Type 7 modules based on the Intel C3000 CPU. It is ideally suited for evaluation purposes, for software development and for prototyping of Type 7 applications.
It contains the new COM Express baseboard for Type 7 modules providing the interface infrastructure for the COM Express Type 7 modules with various PC type connectors for external access. In addition the Starter Kit comes with the suitable Heatsink with Fan for MSC C7B-DV and C7B-DVL modules, a PCIe Graphics Card, 2x DDR4 memory modules and a suitable ATX power supply.
The MSC C7-SK-DV-EV-KIT001 does not contain the COM Express module thereby leaving the choice of module variant to the user. The suitable MSC C7B-DV or C7B-DVL module should be ordered along with the Starter Kit.
Highlights
- Starterkit for COM Express™ Type 7 modules with Intel “Denverton” C3000 CPU
- Heatsink with Fan for MSC C7B-DV or C7B-DVL modules
- 2x 4GB DDR4 SODIMM
- PCIe Graphics Card
- Baseboard for Type 7 modules
- Seven PCI Express slots x4 and x8
- Two SATA connectors *
- Four USB 2.0/3.0 connectors *
- RJ45 LAN connector GbE
- Two RJ45 LAN connectors 10GbE *
- Two SFP+ Slots 10GbE *
- SD Card socket
- Super IO controller
- Slot for optional BMC add-on card
- POST code LED display
- Various additional COM Express™ specific interfaces
- ATX-style power connector / 12V-only jack
- Size 305mm x 244mm
- *Support depending on COM Express module used
Specifications
| Technology: | COM Express Type 7 Starterkit |
| Form Factor: | ATX |
| Flash: | Socket for external BIOS Flash |
| Storage Interfaces: | 2x SATA 6Gb/s; SD Card socket |
| USB: | 4x USB 3.0 (USB 2.0 compliant) |
| Serial Interfaces: | 2x serial RS232 ports from COM Express module on pin-headers 2x serial RS232 legacy ports from Super I/O on pin-headers |
| Bus Interfaces: | PCI Express™ One PCI Express x8 (on PCI Express x16 socket), six PCI Express x4 (on PCI Express x4 or x16 sockets); LPC/eSPI LPC/eSPI on 10-pin header; |
| Display Controller: | PCIe Graphics Card enclosed |
| Display Interfaces: | via optional BMC add-on card |
| Network Interface: | 2x RJ45 connectors for 10Gb LAN from COM Express module, 1Gb/s, 10Gb/s supported, 2x SFP+ connectors for 10Gb LAN from COM Express module, 1Gb/s, 10Gb/s supported, 1x RJ45 connector for 1Gb LAN from COM Express module, 10/100/1000 Mb/s supported |
| Miscellaneous: | Feature connector Carrying SMBus, I²C bus, power button, reset button, beeper, HD LED and other system signals GPIO Four input, four output signals on a pin header; partially shared with SD Card socket Super I/O LPC/eSPI based Super I/O with 2x COM, |
| Feature Highlights: | Full featured carrier board for COM Express Type 7 pin-out |
| Power Requirement: | ATX Power Supply enclosed Standard 20pin ATX power connector and additional ATX12V connector Additional power jack for single voltage supply (wide input range 12V to 20V) |
| Environment: | Ambient Temperature: 0° … 85°C (operating, MSC C7-MB-EV only), -25° … 85°C (storage, MSC C7-MB-EV only) Humidity: 5 … 95% (operating, non-condensing), 5 … 95% (storage, non-condensing) |
| Dimensions: | 305mm x 244mm |
| Certificates: | NO Certificates |
| Cooling: | Heatsink with Fan enclosed |