MSC Q7-MB-EP5
SimpleFlex is the intelligent combination of a standard Computer-On-Module with a standard carrier board. It combines the advantages of Standard SBC and Custom SBC by choosing the COM from a huge portfolio of CPU and memory configuration.
This is the basis for innovative solutions in HMI systems, complex display systems, IoT gateways, professional infotainment systems, object recognition systems, transportation applications, medical devices, gaming systems and building automation, among others.
The ready-to-use platform is cost-efficiently adapted with the selected interfaces and assembled in-house at full-automatic production lines. For the customization, more than 30 pre-validated interface combinations are available. SimpleFlex is therefore best suited for series production with large quantities.
The Qseven slot of the board is compliant with Qseven rev. 2.0 but can support all other Qseven revisions as well.
The EP5 is not suited for low-volume applications. The MSC Q7-MB-EP6 (x86) and the MSC Q7-MB-EP4-001 (ARM) are suggested for evaluation and use in low-volume Qseven applications.
Highlights
- Low-cost application board for medium to high volume use of any Qseven computer module (x86 or ARM)
- Dual Gigabit Ethernet
- Up to 2x SATA-II connectors
- Mini PCI Express Card
- mSATA Card socket
- SD Card or Micro-SD Card slot (option)
- SIM Card slot
- 1x USB 3.0, up to 3x USB 2.0 connectors
- 1x USB 2.0 Host/Client on µUSB connector
- RS-232, RS-485 or opt. CAN (opt. galv. isolated)
- DisplayPort connector for output of graphics signals from Qseven module
- Dual-channel LVDS on JILI30 connector
- Selectable Backlight power 3.3V, 5V or 12V
- Adjustable Backlight intensity
- WLAN / Bluetooth / NFC with antenna (option)
- 4-wire touch controller (option)
- I2S or HD Audio codec (option)
- SPI / I2C / GPIO on Feature Connector
- Input voltage up to 36V
- Industrial temperature versions available
Specifications
| Form Factor: | Qseven™ Standard Rev. 2.0 compliant interface |
| RAM: | NO RAM |
| Flash: | NO Flash |
| Storage Interfaces: | 2x SATA connectors routed to Qseven module mSATA Card slot (full size) SD Card or Micro-SD Card socket with 4-bit interface |
| USB: | 1x USB 3.0 Host Type A connector 2x USB 2.0 Host Type A connectors 1x micro USB Host/Device connector 1x USB Host on internal pin header 1x USB at miniPCIexpress socket |
| Serial Interfaces: | RS-232 signals on 4-pin JST connector or on Feature Connector (pin header) RS-485 signals on 4-pin JST connector (optional galvanic isolation)/td> |
| Bus Interfaces: | SPI, I2C, GPIO on pin header (support depends on module used) CAN Bus signals on 4-pin JST connector (optional galvanic isolation; alternatively to RS485) MiniPCIexpress card socket with USB support and MicroSIM card slot |
| Display Interfaces: | DisplayPort connector driven by DP signals from module or from HDMI/DP converter (optional µHDMI connector) LVDS interface on Jili30 connector, alternatively eDP (module dep.) Backlight connector onboard (3.3/5/12V), Backlight brightness control sup |
| Network Interface: | 2x Ethernet RJ45 connectors with LED - One channel directly connected to LAN from Qseven module - One channel via i210 GbE PCIe controller on baseboard |
| Audio Interface: | HD Audio or I2S Audio codec (option) Audio out via IDC connector |
| Miscellaneous: | WLAN / Bluetooth / NFC device SPB209A (optional, either with antenna or antenna connector) |
| Power Requirement: | 4-pin power connector for 10-28VDC (optionally up to 36V) Battery slot for DL2032 Lithium battery |
| Environment: | Operating Temperature -40°… 85°C (operating) -40°… 85°C (storage) Humidity 20 … 80% (operating, non-condensing) 5 … 95% (storage, non-condensing) |
| Dimensions: | 148 x 102 mm |
| Certificates: | UL / CE |