MSC Q7-SK-BW-EP6
The Qseven Starter Kit for Qseven modules with the Intel “Braswell” N3000 is based on a 3.5″ Qseven rev. 2.0 carrier board MSC Q7-MB-EP6 and contains all necessary products to quickly enable the user to run and evaluate the Q7-BW module range. The kit does not contain a Qseven module in order to give the user greater flexibility as to which particular module version and CPU speed variant is desired.
As part of the Qseven Starter Kit, the appropriate heatspreader will be supplied. A power supply with cable kit is also included for convenience. Direct screen output on a DP monitor is possible using the on-board DP connector.
Highlights
- 3.5″ Qseven carrier board with socket for Qseven Rev. 2.0 module
- Heatsink for all module variants of the Q7-BW family
- 12V power supply and cable kit included for immediate operation of the Starter Kit
- Getting Started Manual, Drivers, Manuals etc. can be downloaded from Support website
- DP graphics output
- LVDS graphics output on standard 30-pin connector; backlight connector includes adjustable backlight voltage and dimming
- 2x Ethernet (10/100/1000 LAN) connector, 1x SATA connector
- USB 3.0, 3x USB 2.0, 1x microUSB OTG, 2x UART, SD-Card socket, miniPCIexpresss and mSATA slots
- Getting Started manual
- Optional 7″ WVGA (800 x 480) and 12.1″ XGA (1024×768) TFT kit
Specifications
| Technology: | x86 |
| Form Factor: | Qseven |
| CPU: | CPU DATA HERE! |
| RAM: | NO RAM |
| Flash: | NO Flash |
| Storage Interfaces: | 2x SATA 3Gb/s |
| USB: | USB 3.0 4x USB 2.0 |
| Serial Interfaces: | 1x RS232 |
| Bus Interfaces: | I²C Bus SMBus SPI |
| Display Interfaces: | DP (derived from DP++ channel) LVDS 18/24 bit, dual channel |
| Network Interface: | 2x 10/100/1000Base-TX (one from Qseven module, one from on-board LAN Controller) |
| Audio Interface: | High Definition Audio |
| Miscellaneous: | RTC battery holder |
| Power Requirement: | +10V..+28V input voltage |
| Environment: | Ambient Temperature: 0° … 60°C (operating), -40° … 85°C (storage) Humidity: 5 … 95% (operating, non-condensing), 5 … 95% (storage, non-condensing) |
| Dimensions: | 148mmx102mm |
| Certificates: | UL / CE |
| Cooling: | Suitable Heatspreader with Heatsink for Q7-A50M Module |
| Carrier: | Carrier board in 3.5" (ECX) form factor |